About This Engine

Transmission compatibility (factory pairings): 4L60E 4 speed automatic (light duty Gen III applications), 4L65E 4 speed automatic, 4L70E 4 speed automatic (Gen IV), 4L80E 4 speed automatic (HD truck applications, the most common Vortec 6000 transmission), 4L85E 4 speed automatic (HD), 6L80 6 speed automatic (Gen IV light duty), 6L90 6 speed automatic (Gen IV HD, replaced 4L80E in some applications). Aftermarket LS-spec manual transmissions: T56 6 speed, TR-6060 6 speed, Tremec TKO. The 6.0L Vortec uses the LS bell housing bolt pattern, making it directly compatible with all LS-era GM transmissions.

Not sure if this fits your project? Call (240) 301-0095 with your year, model, and intended use (factory replacement or LS swap). We confirm variant, generation, AFM status, VVT status, and flex fuel capability before every order ships.

Common Names and Search Terms

Used OEM vs Rebuilt vs Built 6.0L Vortec

A documented used OEM 6.0L Vortec from a known donor with verified compression, variant confirmation, AFM/VVT status, lifter condition, and donor history is the most cost effective option for most replacement and LS swap projects. Pricing is roughly half of a remanufactured unit. Our 6.0L Vortec engines are compression tested across all 8 cylinders, variant confirmed, AFM lifter condition inspected (critical for L76, L77, L96), and donor history disclosed where available.

A professionally rebuilt 6.0L Vortec from a specialty LS shop typically runs $3,500 to $6,500 plus core charge depending on variant. Standard rebuild includes new bearings, rings, gaskets, head gasket, water pump, timing chain components, oil pump, and valve job. AFM delete (non-AFM cam and lifters) is a popular option on Gen IV variants.

A built 6.0L LS engine for forced induction (turbo, supercharger, or nitrous) runs $7,500 to $15,000 plus depending on power target. The 6.0L iron block can handle 1,000 plus horsepower with appropriate supporting hardware (forged crank, forged rods, head studs, cam, valvetrain). Built makes sense for serious LS swap projects targeting 700 plus hp.

Condition and Inspection Process

• Compression test across all 8 cylinders, pressure per cylinder recorded
• Visual inspection of block for cracks
• Cylinder heads inspected for warping or cracks
• Variant confirmed (LQ4, LQ9, L76, LY6, LFA, L96, L77, LZ1, LC8)
• Generation documented (Gen III 1999-2007 or Gen IV 2007+)
• AFM (Active Fuel Management) status disclosed
• VVT status documented (Gen IV variants)
• Lifter condition inspected via valve cover removal where possible (critical for AFM units)
• Knock sensor and valley pan condition disclosed
• Exhaust manifold bolt status disclosed
• Donor vehicle (Silverado HD, Sierra HD, Suburban, Hummer H2, etc.) confirmed
• Year and ECU calibration code documented

Mileage on 6.0L Vortec engines is documented from the donor vehicle when available. HD truck Vortec 6000 donors often have 200,000 plus miles given commercial use. Where mileage cannot be verified, we disclose this clearly before shipping.

Buyer Tips, What to Know Before You Order

• Confirm variant first: Ten distinct variants exist with different output, AFM status, VVT, and flex fuel capability. Match the variant to your vehicle year and application.
• For Gen IV variants with AFM (L76, L77, L96): Plan for AFM delete at install (non-AFM cam and lifters). The AFM lifter failure pattern is well documented and preventive deletion is standard practice in the LS community.
• ARP exhaust manifold studs are a strongly recommended preventive upgrade on any 6.0L Vortec rebuild. Exhaust manifold bolt failure is universal across the family.
• Knock sensor replacement and valley pan reseal is recommended at install on any high mileage donor.
• For LS swap projects: The 6.0L Vortec is the most popular LS swap displacement. Iron block handles boost very well. Aluminum LFA hybrid block is lighter but limited supply.
• For Holden / Pontiac G8 GT owners: The LS2 is NOT a Vortec 6000 despite the same displacement. Different camshaft and intake. Confirm engine code before purchase.
• Plan for fresh fluids, full spark plug set (8 plugs), and water pump at install regardless of donor history.
• 4L80E / 4L85E HD transmissions are the most common pairing for HD truck Vortec 6000 applications. The 6L90 replaced these in later applications.

Why Buy From Vaz Auto Solutions

• Variant confirmed before you pay (LQ4, LQ9, LY6, L96, L77, LFA, L76, etc.)
• Generation documented (Gen III 1999-2007 or Gen IV 2007+)
• AFM status disclosed (critical lifter failure issue on L76, L77, L96)
• VVT and flex fuel status documented (Gen IV variants)
• All 8 cylinders compression tested, results shared before order is confirmed
• Lifter condition inspected (critical for AFM lifter failure pattern)
• Knock sensor and exhaust manifold bolt status disclosed
• Donor vehicle disclosed (Silverado HD, Sierra HD, Suburban, Hummer H2, Escalade)
• Fitment verified for your specific GM application or LS swap project
• No core charge, keep your old engine
• Free crated freight delivery to all 50 states
• 15 day replacement warranty on internal engine defects
• Call (240) 301-0095, talk to someone who actually understands the LQ4/LQ9/LY6/L96 variant differences and the AFM lifter failure pattern

The GM 6.0L Vortec 6000 is a family of cast iron and aluminum block V8 engines based on the LS small block architecture, produced from 1999 through 2019. The 6.0L Vortec was the dominant heavy duty truck V8 in GM heavy duty pickups, full-size SUVs, vans, and the Hummer H2 throughout that period. With 6.0 liters of displacement, 4.00 x 3.62 inch bore and stroke, and modern LS architecture (deep skirt block, 6 bolt cross-bolted main bearing caps, aluminum cylinder heads from 2001 onward), the Vortec 6000 produced 300 to 369 horsepower depending on variant and provided the foundation for countless LS swap projects.

Ten distinct factory variants of the 6.0L Vortec exist, divided into Gen III (1999 to 2007) and Gen IV (2007 to 2019). Gen III variants are the LQ4 (300-335 hp, 9.4:1 compression, dished pistons, 1999-2007) and the LQ9 / VortecMAX (345 hp, 10.1:1 compression, flat-top pistons, 2002-2007). Gen IV variants include the L76 (366 hp with AFM), LY6 (360-369 hp with VVT), LFA (332 hp aluminum block hybrid), L96 (360 hp with VVT and flex fuel, 2010-2019), L77 (360 hp E85 capable AFM, passenger cars), LZ1, and LC8 (special applications including CNG conversion). The LS2 6.0L (Corvette C6, Pontiac G8 GT 2008-2009) shares the same displacement but uses a different camshaft and intake manifold and is technically a passenger car engine, not a Vortec 6000.

All Vortec 6000 variants share the same 4.00 x 3.62 inch bore and stroke (101.6 mm x 92 mm) and 6.0L displacement. All variants share the LS bell housing bolt pattern, making them swap-friendly with the 4L60E, 4L65E, 4L70E, 4L80E, 4L85E, 6L80, 6L90 transmissions. Block material is cast iron on all variants except the LFA hybrid (aluminum). Cylinder heads are aluminum on all variants except the 1999-2000 LQ4 (which used cast iron heads). The 6 bolt cross-bolted main bearing caps and deep skirt design provide exceptional bottom end strength, making the 6.0L Vortec one of the most popular LS swap engines for high horsepower forced induction builds (1,000 plus horsepower is achievable on stock blocks).

A documented used OEM 6.0L Vortec with verified variant, generation, AFM status, VVT status, lifter condition, and donor history is the right replacement for any Silverado HD, Sierra HD, Suburban, Yukon XL, Tahoe, Avalanche, Express, Savana, Hummer H2, or Cadillac Escalade owner, as well as the right starting point for LS swap projects. We document the variant, generation, AFM/VVT/flex fuel status, donor vehicle, and inspect lifter condition (critical for AFM lifter failure on L76, L77, L96) before shipping every order.

Signs You Need a Replacement Engine

• AFM (Active Fuel Management) lifter failure on L76, L77, L96 variants - the #1 documented Vortec 6000 failure pattern
• Cylinder misfire, particularly on cylinders 1, 4, 6, 7 (the four cylinders that AFM deactivates) due to lifter collapse
• Bent pushrods after AFM lifter failure
• Broken exhaust manifold bolts causing exhaust leak (very common across all 6.0L Vortec variants)
• Knock sensor failures (corrosion in valley pan area)
• Water pump leaks (40,000 to 80,000 mile wear interval)
• Excessive oil consumption beyond 1 quart per 1,000 miles, particularly on AFM units
• Cylinder wall scoring on heavily neglected oil-starved units
• Loss of compression on one or more cylinders
• Cracked iron blocks from overheating (rare but documented)

Known Things to Know Before You Buy

• AFM (Active Fuel Management) lifter failure is the #1 known issue on Gen IV variants (L76, L77, L96 in particular). The AFM hydraulic lifters fail in deactivation mode and can cause bent pushrods, head damage, and cam wear. Many builders preventively delete AFM (replace with non-AFM lifters and a non-AFM cam) at install. Plan for AFM delete on L76, L77, L96 sourcing.
• LY6 does NOT have flex fuel capability. L96 (which replaced LY6 in 2010) DOES have flex fuel. Otherwise the engines are nearly identical (same iron block, aluminum heads, VVT, cathedral port heads).
• LFA is the only aluminum block 6.0L Vortec. Used in the GMT900 hybrid trucks (Silverado/Sierra/Tahoe/Yukon Hybrid 2008-2009, Cadillac Escalade Hybrid). 332 hp with 10.7:1 compression. Less common in salvage market.
• 1999-2000 LQ4 had cast iron cylinder heads and cable-operated throttle. 2001-2007 LQ4 had aluminum heads. 2003+ LQ4 had drive-by-wire electronic throttle. Match the year to your vehicle harness expectations.
• LQ9 / VortecMAX is the high-output variant (345 hp / 380 lb-ft) used in the 2002-2007 Cadillac Escalade, ESV, EXT, Chevrolet Silverado SS, Chevrolet Avalanche VortecMAX, and GMC Yukon Denali. Flat-top pistons and 10.1:1 compression.
• Exhaust manifold bolts breaking is documented across ALL 6.0L Vortec variants. ARP exhaust manifold studs are a popular preventive upgrade.
• Knock sensors fail due to corrosion from coolant intrusion in the lifter valley. Plan for knock sensor replacement and valley pan reseal at install.
• LS architecture: All 6.0L Vortec variants use the LS bell housing bolt pattern, making them compatible with the 4L60E, 4L65E, 4L70E, 4L80E, 4L85E, 6L80, 6L90, and aftermarket LS-spec manual transmissions (T56, TR-6060, etc.).
• LS2 6.0L vs Vortec 6000: The LS2 (Corvette C6, Pontiac G8 GT 2008-2009, Saab 9-7X Aero, Australian HSV products) is a 6.0L passenger car engine with a different camshaft, intake manifold, and ECU calibration. It is NOT a Vortec 6000. The Vortec 6000 is a truck-spec engine.

6.0L Vortec / LS-Based Variants by Year and Application

Verified factory variants:

What Is Included, What Is Not Included

Vehicle Compatibility, Direct Fit

Direct factory applications:

LS Swap Targets (Most Common Vortec 6000 Use Case)

The 6.0L Vortec is one of the most popular LS swap engines due to displacement, iron block durability, and aftermarket support. Common swap configurations:

Classic Chevrolet C10 / K10 truck	LQ4 or LY6 swap, very common
Classic muscle car restomods (Camaro, Chevelle, Nova)	6.0L LS swap with 4L80E or T56
Square body Chevy / GMC trucks (1973-1991)	Displacement 6.0L (5 | 967 cc | 364 cu in) Configuration 16 valves | 90 degree V8 | OHV pushrod Bore X Stroke 4.00 in x 3.62 in (101.6 mm x 92 mm) Compression Ratio 9.4:1 (LQ4) to 10.8:1 (LFA) | most variants 9.6:1 to 10.7:1 Aspiration Naturally Aspirated Fuel System Sequential port fuel injection (SFI) Block Material Cast iron (most variants) or cast aluminum (LFA hybrid only) Head Material Aluminum alloy (except 1999-2000 LQ4) Block Construction 6 bolt cross-bolted main bearing caps Valve Train 2 valves per cylinder | OHV pushrod | hydraulic roller lifters; VVT on Gen IV Crankshaft Cast iron Connecting Rods Powdered metal forged I-beam Pistons Cast aluminum hypereutectic | flat-top | dished | or dished with valve reliefs Production Years 1999 to 2019 Manufacturer General Motors Engine Family GM LS-based small block (Gen III and Gen IV) Bell Housing Pattern GM LS V8 standard | compatible with all LS-era transmissions Compatible Transmissions 4L60E | 4L65E | 4L70E | 4L80E | 4L85E | 6L80 | 6L90 | T56 manual | TR-6060 manual Horsepower Range 300 hp (early LQ4) to 369 hp (LY6/L96 high output) Brian K., Memphis TN 2024-08-11 Sourced an LY6 6.0 Vortec from Vaz for my 1969 Camaro LS swap. They confirmed LY6 (not L96 since I did not need flex fuel), came out of a 2010 Silverado 2500HD donor with around 95,000 miles. Compression strong, lifters healthy, knock sensors clean. Vaz knew the difference between truck Vortec 6000 and the LS2 / LS3 passenger car engines, which other sellers conflated. Engine is now backed by a 4L80E producing solid 380 hp through the rear wheels. Best Camaro decision I made. Doug R., Phoenix AZ 2024-12-10 Bought an LQ4 from Vaz to replace mine after 287,000 miles of commercial use finally caught up to it. They confirmed LQ4 (not LY6 since I have a 2007 Classic body which is the last LQ4 year), came out of a 2007 Hummer H2 donor with verified mileage around 110,000. Compression was strong across all 8. They flagged ARP exhaust manifold studs as a recommended preventive upgrade which I did. Truck is back to pulling my 14,000 lb gooseneck without issues. What variants of the 6.0L Vortec exist? Ten distinct factory variants. Gen III (1999-2007): LQ4 (300-335 hp, 9.4:1 compression, dished pistons), LQ9 / VortecMAX (345 hp, 10.1:1, flat-top pistons). Gen IV (2007-2019): L76 (366 hp with AFM), LY6 (360-369 hp with VVT, no flex fuel), LFA (332 hp aluminum block hybrid), L96 (360 hp with VVT and flex fuel), L77 (360 hp E85 AFM), LZ1, LC8 (CNG). The LS2 6.0L is also 6.0L but is a passenger car engine (Corvette C6, Pontiac G8 GT) with a different cam and intake, NOT a Vortec 6000. What is the difference between LQ4 and LQ9? The LQ4 (1999-2007) has dished pistons and 9.4:1 compression, producing 300-335 hp depending on year. The LQ9 / VortecMAX (2002-2007) has flat-top pistons and 10.1:1 compression, producing 345 hp. The LQ9 is the high-output performance variant used in the Cadillac Escalade, Chevrolet Silverado SS, Chevrolet Avalanche VortecMAX, and GMC Yukon Denali. What is AFM and why does it matter? AFM (Active Fuel Management) is GM cylinder deactivation technology that runs the engine on 4 cylinders under light load to improve fuel economy. AFM is enabled on the L76, L77, and L96 variants. The AFM hydraulic lifters have a documented failure pattern where they fail in deactivation mode, causing bent pushrods, head damage, and cam wear. Many builders preventively delete AFM (replace with non-AFM cam and lifters) at install. Plan for AFM delete on L76, L77, L96 sourcing. Will a 6.0 Vortec fit any LS-era transmission? Yes. All 6.0L Vortec variants use the standard GM LS V8 bell housing bolt pattern. They are directly compatible with the 4L60E, 4L65E, 4L70E, 4L80E, 4L85E, 6L80, and 6L90 transmissions. Aftermarket LS-spec manual transmissions like the T56 and TR-6060 also bolt directly. The most common HD truck pairing is the 4L80E with the LQ4 / LY6 / L96 variants. Is the LS2 a Vortec 6000? No. The LS2 is a 6.0L passenger car engine used in the Corvette C6 (2005-2007), Pontiac G8 GT (2008-2009), Saab 9-7X Aero (2008), Australian Holden HSV products, and Cadillac CTS-V (2005-2007). It shares the 6.0L displacement and 4.00 x 3.62 inch bore and stroke with the Vortec 6000 family but uses a different camshaft, intake manifold, and ECU calibration. The LS2 makes 395-400 hp, more than any Vortec 6000 variant. It is NOT a truck engine. Is there a core charge? No. You are not required to return your old engine under any circumstance. What replaced the 6.0L Vortec? The L8T 6.6L Gen V iron-block V8 replaced the L96 6.0L Vortec in 2020 in HD truck applications (Silverado 2500HD, Sierra 2500HD, Suburban HD, Yukon XL HD). The L8T produces 401 hp / 464 lb-ft and shares architecture with the 6.2L L86 / L87 V8 but with a longer stroke and iron block. The L8T is NOT swap-compatible with LS architecture transmissions without adapters. How does shipping work? Free crated freight delivery to all 50 US states. Typical transit 5 to 10 business days. Engines ship crated for protection. Call with your ZIP code for an accurate timeline. 15 Day Replacement Warranty Every used 6.0 Chevy Engine For Sale sold by Vaz Auto Solutions is covered by a 15 day replacement warranty from the date of delivery. Covered Internal defects present at the time of delivery Part does not perform as described Wrong part shipped due to our fulfilment error Not Covered Damage from improper installation Damage from incompatible components External components unless specifically listed Labor costs of any kind To make a claim, contact us within 15 days of delivery at (240) 301-0095 or info@vazautosolutions.com. Variant Confirmed: LQ4, LQ9, LY6, L96, L77, LFA, L76 verified before you pay Generation Documented: Gen III 1999-2007 or Gen IV 2007+ disclosed AFM Status Disclosed: Critical lifter failure issue on L76, L77, L96 VVT Status Documented: Gen IV variants confirmed All 8 Cylinders Tested: Compression results available before order is confirmed Lifter Condition Inspected: Critical for AFM lifter failure pattern LS2 Distinction: Passenger car LS2 NOT confused with Vortec 6000 Donor Vehicle Disclosed: Silverado HD, Sierra HD, Hummer H2, Escalade identified Free Shipping All 50 States: Crated freight, no hidden fees or surcharges No Core Charge: Keep your old engine, no return required 15 Day Warranty: Internal defects covered from delivery date Related Products Cadillac 429 Engine for Sale | 1964 to 1967 Big Block V8 (7.0L) Engine $15,765.00 View Details Porsche Carrera GT Engine for Sale | Typ 980 5.7L V10 Naturally Aspirated Engine $4,999.00 View Details Chevy 8.1L Engine for Sale | Vortec 8100 496ci Big Block V8 (L18) Engine $2,499.00 View Details Mazda B2600 Engine for Sale | 2.6L G6 Inline-4 Pickup Truck Engine $2,699.00 View Details BMW M54B30 Engine for Sale | 3.0L DOHC Inline-6 with Double VANOS Engine $3,999.99 View Details Search Products Engines Transmissions Axles Brakes Suspension Categories Engines Transmissions Axles Suspension Steering Racks Wheels Tires Brakes View All Parts Need This Part? Call Now & Get Instant Answers! INSTANT AVAILABILITY BEST PRICES OVER PHONE VIN VERIFIED FITMENT EXPERT SPECIALISTS Speak With A Specialist (240) 301-0095 TAP TO CALL NOW! QUALITY PARTS. TRUSTED SERVICE. (240) 301-0095 Searching for Auto Parts ? Instant Parts Availability Real-time stock across thousands of OEM parts Best Price Guarantee Direct wholesale pricing with fitment warranty Expert Parts Specialists VIN-verified matching by automotive professionals TALK TO A SPECIALIST NOW (240) 301-0095