This is a front axle shaft for a full-size Chevy/GMC truck, made of heat-treated steel with a corrosion-resistant coating, about 21 inches long, with a 6-bolt input flange, a 33-spline output, and an M24x2.0 spindle nut. It transfers torque to the front wheel on a 4WD truck. This is a used part, inspected before it ships.
An important correction: the live title called this a 'FWD' (front-wheel drive) axle shaft. A Chevy pickup, Blazer, or GMC Jimmy is a rear-wheel-drive or 4WD body-on-frame truck, not front-wheel drive, so 'FWD' is almost certainly wrong. The specs point to a front (4WD) axle shaft. The live page also had a 'Chevy Blaze' typo (Chevy Blazer) and a confused 'non-US market' claim, both corrected. The listed vehicles are the full-size Blazer and Jimmy (1973 to 1991), so confirm 2WD vs 4WD and the exact year by VIN.
| Item | Details |
|---|---|
| Drivetrain | 2WD or 4WD, by VIN (a front axle shaft is a 4WD part). |
| Year | 1973 to 1991, by VIN. |
| Spline/Flange | 6-bolt flange, 33-spline output match. |
2WD vs 4WD, confirmed by VIN (front axle shaft is a 4WD part)
Your exact year, 1973 to 1991
The 6-bolt flange and 33-spline output match
Left or right side, confirmed
| Item | Details |
|---|---|
| INCLUDED | The used front axle shaft as confirmed for your truck. |
| NOT INCLUDED | U-joints, seals, and spindle nut, unless confirmed at order. |
| Tools You Need | Front-axle service tools and a professional installer; torque to spec. |
This Chevy front axle shaft is offered for the following:
| Vehicle | Compatibility |
|---|---|
| Chevy Blazer (K5) | 1973 to 1991, 4WD, confirm by VIN |
| GMC Jimmy | 1973 to 1991, 4WD, confirm by VIN |
This front axle shaft is offered for the full-size Chevy Blazer and GMC Jimmy (1973 to 1991). Because a front drive axle shaft exists only on a 4WD truck, confirm 2WD vs 4WD and the exact year by VIN at order. We disclose the donor details before shipping.
Not sure which axle shaft you need? Call (240) 301-0095 with your VIN. Our team confirms 2WD vs 4WD, the year, and the spline match before your order ships.
Quality control for this part includes:
Drivetrain identified, confirmed 4WD by VIN
Splines inspected for wear and twist
Flange and bolt holes checked
Donor details recorded before packaging
What is included confirmed with you before shipping
This is a used drivetrain part. Because the live title mislabeled the drivetrain, we confirm 2WD vs 4WD, year, side, and spline match with you directly. A professional install with the shaft torqued to spec keeps the front driveline safe.
| Application | Chevy Blazer / GMC Jimmy | 1973 to 1991 |
|---|---|
| Material | Heat-treated steel | coated |
| Length | About 21 inches |
| Input Connection | 6-bolt flange |
| Output Connection | 33-spline |
| Spindle Nut Thread | M24x2.0 |
| Drivetrain | Front axle shaft | 4WD (confirm by VIN) |
| Sold As | Used | inspected |
| Shipping | Free to all 50 states | no core charge |
| Warranty | 15 day replacement warranty from delivery |
| Category Note | Recategorize from Uncategorized to Axle Shaft |
| Condition | Used |
| Sku | vaz386 |
Contact (240) 301-0095 within 15 days of delivery.
