This is the engine control module (ECM) for the Land Rover Freelander. The ECM manages fuel delivery, ignition timing, emissions, and overall engine operation, reading the engine sensors and driving the actuators. A correct, properly programmed ECM keeps the engine running smoothly, stores diagnostic trouble codes, and helps the vehicle meet emissions requirements.
Two points matter most for a used ECM. First, programming: a used ECM must be flashed to your vehicle's VIN and synchronized with the immobilizer and security system by a specialist. An unprogrammed or mismatched ECM will prevent the engine from starting. The live page's 'Plug-and-Play... come ready to use' line is overstated and contradicts the page's own FAQ, which notes that many ECMs require VIN-specific programming; a Land Rover ECM is generally not plug-and-play, so that framing is corrected here. Second, exact match: the ECM is part-number-specific to one engine, year, and transmission, so confirm the exact part by VIN rather than by the broad model list.
A US note on fitment: the Freelander 1 reached the US for 2002 to 2005, and the Freelander 2 was sold in the US as the LR2 (2008 to 2015). The live description was heavily machine-translated (for example 'if your old machine breaks down', 'gathering information from tools', and a garbled line about 'torque vectoring'); it is reworded here, and the source page should be corrected.
| Item | Details |
|---|---|
| Fit | Exact engine, year, and part number by VIN. |
| Programming | VIN-specific flashing required by a specialist. |
| Security | Immobilizer sync required; not plug-and-play. |
The exact ECM part number for your engine, year, and transmission, by VIN
That a specialist will VIN-program (flash) the ECM
That the immobilizer and security system will be synchronized
Whether your vehicle is a Freelander 1 (US 2002 to 2005) or Freelander 2 / LR2 (US 2008 to 2015)
| Item | Details |
|---|---|
| INCLUDED | The Freelander ECM as confirmed by VIN; exact part number confirmed at order. |
| NOT INCLUDED | Programming service, mounting bracket, connectors, or keys unless confirmed at order. |
| Tools You Need | Professional fit and programming: battery disconnect, and a dealer-level or specialist diagnostic tool for VIN-specific flashing and immobilizer synchronization. |
This ECM is offered for the Land Rover Freelander, confirmed by VIN. Key fitment points:
| Vehicle | Compatibility |
|---|---|
| Freelander 1 | US 2002 to 2005 (1.8L, 2.0L TD4, 2.5L V6) |
| Freelander 2 / LR2 | US 2008 to 2015 (2.2L TD4, 3.2L I6) |
| Match by | Exact part number, by VIN (one ECM fits one engine) |
The live compatibility list spans both Freelander generations and five engines, but an ECM is part-number-specific to one engine, year, and transmission, so that list shows the range the store may carry, not that one unit fits all. Confirm the exact part number by VIN. In the US, the Freelander 1 was sold for 2002 to 2005 and the Freelander 2 was sold as the LR2 for 2008 to 2015. We confirm the exact part with you before shipping.
Not sure which Freelander ECM you need? Call (240) 301-0095 with your VIN. Our team confirms the exact part number for your engine and year, and explains the VIN programming and immobilizer sync your installer will perform.
Quality control for this part includes:
Exact part number confirmed for your VIN before shipping
Housing, connectors, and pins inspected
Bench-tested before dispatch
VIN-specific programming requirement explained before purchase
Immobilizer sync requirement explained before shipping
We inspect the housing, connectors, and pins, bench-test the unit, and confirm the exact part number for your VIN. Remember that a used ECM is not plug-and-play: a specialist must flash it to your VIN and synchronize the immobilizer, or the engine will not start. We route final programming to a qualified installer.
| Part | Land Rover Freelander engine control module (ECM) |
|---|---|
| Operating Voltage | 12V |
| Housing Material | Aluminum |
| Communication | CAN Bus | OBD-II compliant |
| Connectors | 2 to 3 connectors | 30 to 60 pins |
| Operating Temperature | minus 40 C to 125 C |
| Fits | Freelander 1 (US 2002 to 2005) or Freelander 2 / LR2 (US 2008 to 2015) |
| Match By | Exact part number | by VIN |
| Programming | VIN-specific flashing and immobilizer sync required |
| Condition | Used; bench-tested |
| Shipping | Free to all 50 states | no core charge |
| Category | Control Modules (ECM) |
| Sku | vaz615 |
Contact (240) 301-0095 within 15 days of delivery.