About the Mitsubishi Outlander Rear Bumper Cover

The rear bumper cover is the molded plastic fascia panel at the back of the vehicle, covering the underlying rear bumper reinforcement bar and energy absorber foam. It provides the rear styling appearance, houses parking sensors and reflectors, accommodates the rear license plate area, and protects the underlying structural bumper from minor rear impacts (parking taps, shopping cart bumps, light rear end collisions). Our used Mitsubishi Outlander rear bumper cover is OEM grade polypropylene (PP) or ABS plastic with a 10 point mounting system using factory clip locations plus 4 reinforced bolt through tabs for secure attachment. The integrated 18 mm sensor mounts accommodate factory rear parking sensors on equipped trims, and the 58 mm x 42 mm tow hook access door preserves access to the factory tow point.

Outlander Variant Compatibility Notes

The Mitsubishi Outlander has been sold in the US since 2003, currently in its 4th generation. This specific rear bumper cover is for the 3rd generation Outlander (GF platform, sold in the US 2013 to 2021), and specifically the standard Outlander trim levels. Per the FAQ on the live page, this cover fits 2014 to 2020 model year Outlanders, which covers most of the 3rd generation production run. The 3rd generation received a significant facelift in 2016 that updated the front and (to a lesser extent) rear styling. If you have a 2013 to 2015 pre facelift vehicle, the rear bumper styling is similar but not identical to 2016 to 2020 post facelift, so please verify with us before ordering. This 2014 donor matches the pre facelift styling. IMPORTANT EXCLUSIONS: This cover does NOT fit the following Outlander variants:

• Outlander PHEV (plug in hybrid, US sales started 2017 model year 2018): the PHEV variant has a different rear bumper to accommodate the charging port and PHEV specific badging
• Outlander Sport (called RVR or ASX in other markets): this is a completely different and smaller crossover, not just a trim of the Outlander, and has different rear bumper dimensions
• 4th generation Outlander (2022 onwards, Nissan Rogue platform sharing): completely different bumper design
• 1st generation (2003 to 2006) and 2nd generation (2007 to 2012) US Outlanders: also different bumper designs

Common Reasons to Replace a Rear Bumper Cover

• Rear end collision damage (parking lot incidents, low speed rear impacts)
• Cracked or torn plastic from impacts
• Paint failure (clearcoat peeling, color fade)
• Tow hook door broken or missing
• Sensor mount damage interfering with parking sensor operation
• Aftermarket trailer hitch installation damage

Why Buy From Vaz Auto Solutions

• Used Outlander rear bumper cover at $85.00
• 10 point mounting clip locations verified
• Sensor cutouts dimensional accuracy checked (18 mm)
• Tow hook access door tested (58 x 42 mm)
• Variant verification: standard Outlander only, NOT PHEV or Sport
• Pre facelift vs post facelift styling match confirmed by VIN
• Free shipping to all 50 states
• 15 day replacement warranty
• 3rd generation Outlander platform expertise on call at (240) 301-0095