Fender flares are one of the most visible exterior components on any Jeep Wrangler. When they fade, crack, or break from off-road use, the entire vehicle looks tired regardless of how clean the rest of the Wrangler is. Additionally, broken or missing flares create legal compliance issues in many US states that require tires to be covered by either body or flare material.
A set of authentic OEM Jeep Wrangler fender flares restores correct factory presentation, provides legal tire coverage, and protects the body fender lip from off-road damage. We inspect every flare set: surface condition, mounting tab integrity, clip engagement points, color uniformity across the set, and flare-to-flare match.
Get your Wrangler back to factory exterior presentation with an authentic OEM flare set today.
About Jeep Wrangler Generations
YJ Generation (1987 to 1995)
Recognition: square headlights (controversial when introduced), leaf-spring front and rear suspension
Flares: further evolved geometry vs JK, OEM textured plastic, Rubicon and other trim variations
Signs Your Wrangler Flares Need Replacement
Matte black factory finish has faded to grey or chalky white from UV exposure
Visible cracks in the flare body from impact or freeze-thaw cycles
Broken mounting tabs (flare wiggles loose or hangs from one fastener)
Missing flares after off-road damage
Extensive gravel rash on outer surfaces that cannot be restored
Color mismatch between front and rear flares from differential UV exposure
Legal compliance issues: tires extending past flare coverage
Aftermarket flares previously installed that no longer fit OEM body holes
Features of Authentic Jeep Wrangler Fender Flares
OEM Mopar Construction: authentic factory-original parts, not reproduction
Matte Black Textured Finish: OEM Wrangler off-road appearance
OEM Mounting Tabs: matches factory body fender lip holes
Generation-Specific Fitment: YJ, TJ, JK or JL each have correct geometry
Full Set Coverage: front and rear flares match in finish
Legal Tire Width Coverage: US state law compliance
Mud and Debris Protection: off-road body protection
Body Protection: flares act as sacrificial layer
Why Choose Our Used Authentic Jeep Wrangler Fender Flares
Cost Savings
Versus new OEM Mopar set: $249 used compared to $400 to $1,200+ new
Versus aftermarket flares: authentic OEM appearance and factory-correct geometry without reproduction variation
Free shipping: all 50 states
Quality Verified
Surface: no severe UV fading, no major cracks
Mounting tabs: all intact for OEM fastener engagement
Color uniformity: matte black depth consistent across set
Set match: flares verified as belonging to same donor or matched age
Donor generation: disclosed
Jeep Specialist Support
Our team works with Jeep Wrangler platforms regularly across all four US generations. We will help you confirm the right generation (YJ, TJ, JK or JL), verify which trim variation (Rubicon, Sahara, Sport, Willys) and identify whether you need front-only, rear-only or full set. Call (240) 301-0095 with your Wrangler year and trim.
Vehicle Compatibility
Direct Fit (specify generation and trim at time of order):
Vehicle
Compatibility
Jeep Wrangler YJ
1987-1995, square headlights, leaf-spring suspension, 2-door only
Jeep Wrangler TJ
1997-2006, round headlights return, coil-spring, includes TJ Unlimited (LJ) 2004-2006
Jeep Wrangler JK
2007-2018, 2-door and Unlimited 4-door, 3.8L V6 then 3.6L Pentastar V6
Jeep Wrangler JL
2018-current, current production, 3.6L Pentastar, 2.0L turbo, EcoDiesel, 4xe hybrid
Trim Variations Within Generation
Sport, Sahara, Rubicon, Willys, X, 80th Anniversary etc, some trims use slightly different flare geometry
NOT Compatible
Across Wrangler generations (YJ flare will not fit TJ, TJ flare will not fit JK, JK flare will not fit JL), and any non-Wrangler Jeep without specific cross-reference verification
Condition and Inspection
Surface condition verified (no severe UV fading, no major cracks, no extensive gravel rash)
Clip engagement points verified where applicable (not stripped or broken)
Color uniformity verified (matte black depth consistent across set)
Flare-to-flare set match (within a single sale, flares match in age and finish)
No prior repair patches or aftermarket trim additions, OR disclosed if present
Wheel-well liner integration verified where applicable (JK and JL)
Leading edge condition (most damage-prone area on off-road vehicles)
Donor Wrangler year and generation disclosed
Cleaned of dirt and grime before shipping
Packaged with surface protection to prevent transit damage
For Jeep Wrangler YJ, TJ, JK and JL generations
Surface condition verified on every flare set
Mounting tab integrity confirmed
Clip engagement points verified
Color uniformity confirmed across set
Flare-to-flare set match verified
Authentic OEM Mopar, not aftermarket reproduction
Donor Wrangler year and generation disclosed
Jeep specialist support team
Cross-reference assistance for generation and trim
Honest disclosure of any cosmetic age signs
Free shipping all 50 states
15 day replacement warranty on defects
No core charge, keep your old flares
Part Type
Fender flare set (or partial set)
Vehicle Application
Jeep Wrangler YJ, TJ, JK or JL, generation-specific
Construction
Textured plastic or rubber composite with molded mounting tabs
Surface Finish
OEM matte black textured (standard) or body-color on Rubicon/Sahara
Set Composition
Typically 4 flares (full set), sometimes available as front-only or rear-only
Mounting Style
Screws into body fender lip plus clips into body holes
Approximate Weight
4 to 10 lbs per set depending on generation
Hardware
Not always included, verify at order
Installation Difficulty
DIY-friendly, 30 to 90 minutes for full set
Tools Needed
Standard sockets and screwdrivers, plastic trim tools
Coding Required
No
Service Life
Typically 5 to 15 years before significant UV degradation
Donor Generation Disclosed
Before shipping
Price
$249.00
Brandon Tatum
Replaced the sun-faded factory flares on my 2014 JK Unlimited (Sport trim) with a verified used set from Vaz. They confirmed JK generation and full set of 4 before shipping. Surface condition was much better than my faded originals, mounting tabs all intact, matte black depth consistent across the set. Installation took about an hour. Wrangler looks years younger now. Great alternative to spending $600+ on new Mopar.
Megan Hartford
Picked up a front pair for my 2003 TJ Sport that lost a flare to a branch strike on a trail run. Vaz confirmed TJ generation and front-pair specifically. Donor was a 2004 TJ which they disclosed. Flares match my existing rears well, matte black depth is very close. One star off because one flare has a small surface scuff that they did disclose with photos, but a bit more visible in person than the photo suggested. Otherwise great service.
Will TJ flares fit my JK Wrangler?
No. Each Wrangler generation has different fender geometry and the flares are not interchangeable. TJ flares (1997-2006) have narrower arches and different mounting hole positions compared to JK flares (2007-2018). JK flares are significantly wider to accommodate the larger factory tires that came with that generation. Always specify your Wrangler generation at the time of order.
Are these authentic OEM Mopar parts or aftermarket reproductions?
These are authentic OEM Mopar parts sourced from donor Wrangler vehicles. We do not sell aftermarket reproduction flares on this listing. If you want aftermarket flares (Bushwacker, Rugged Ridge, Smittybilt, RT Off-Road etc), those are different products available from off-road specialty retailers. Authentic OEM provides factory-correct geometry and matte black texture that matches your existing body trim.
My TJ has Rubicon trim. Will Sport-trim flares fit?
Mostly yes, with caveats. Within a generation, most trim variations use the same basic flare geometry and mounting pattern. The Rubicon trim sometimes has slightly different flare width than base Sport trim, particularly on later JK and JL Rubicons with their wider factory tires. Verify by comparing trim photos against the original Mopar part number. We will help cross-reference your specific trim at order.
How do I install Wrangler fender flares?
Installation overview: (1) Park on level ground. (2) Remove the existing flares by unscrewing the screws from inside the fender lip and releasing the clips with plastic trim tools (some flares have hidden screw locations on the inside of the body). (3) Clean the body fender lip thoroughly. (4) Position the new flare against the body and align with the body holes. (5) Start screws by hand to verify thread engagement (do not cross-thread). (6) Tighten screws in sequence to OEM torque spec (typically light, plastic does not need much torque). (7) Push clips into pre-drilled body holes until they snap. (8) Verify gap consistency between flare and body around the entire arch. Total time 30 to 90 minutes for a full set.
Do you include screws and clips with the flare set?
Hardware varies by listing. Some flare sets come with intact hardware from the donor vehicle, others come bare. Verify at time of order. New Mopar OEM hardware (screw kit and clip kit) is available from Jeep dealers or specialty suppliers for typically $20 to $50 per Wrangler. Reusing old hardware is acceptable if it is in good condition (threads not stripped, clips not broken).
My Wrangler has aftermarket flares already installed. Can I switch back to OEM?
Usually yes, but verify the body holes are still intact. Some aftermarket flare installations (especially pocket-style flares with extended coverage) involve drilling additional body holes or trimming the body fender lip. If the body has been modified, OEM flare installation may not be possible without bodywork repair. If the body is unmodified and the aftermarket flares simply replaced OEM with the original mounting points, then OEM flares will reinstall cleanly.
How do I check whether my factory flares are still legal in my state?
Tire coverage law varies by state. Generally, the entire tread of the tire must be covered by either the body or the flare when viewed straight on (looking at the side of the vehicle). If your tire sticks out beyond the flare, you may be in violation depending on state. California and a few other states have specific tire coverage requirements. Wider tires (35-inch or larger) typically require either wider flares or fender trimming. Check your state's specific vehicle equipment laws or call us for guidance.
How does shipping work?
Free shipping to all 50 US states. A full flare set weighs 4 to 10 lbs and ships in a larger box (typically 36 x 24 x 18 inches or similar) to protect the flare profiles. UPS or FedEx Ground. Typical transit is 5 to 10 business days from order confirmation given the larger package handling. Each flare is wrapped in foam to prevent surface damage in transit.
15 Day Replacement Warranty
Covered:
Defects discovered at delivery (broken flares on arrival not disclosed prior, severely faded color not flagged before shipping, missing pieces from advertised set, broken mounting tabs not disclosed)
Not Covered:
UV fading or weathering that occurs after install (the part is used and the UV exposure history is what it is)
Damage from improper installation including overtightened screws that crack the plastic
Damage from off-road use after install
Normal cosmetic age signs consistent with used parts
Labor costs of any kind
Note: these are used parts with age-appropriate cosmetic characteristics. Verify generation and set composition before ordering. Contact (240) 301-0095 within 15 days of delivery.
For Jeep Wrangler YJ, TJ, JK, JL: All four US generations
Surface Condition Verified: No severe fading or cracks
Mounting Tabs Confirmed: All intact
Clip Engagement Points: Verified where applicable
Color Uniformity: Matte black depth consistent
Flare-to-Flare Set Match: Within sale
Authentic OEM Mopar: Not aftermarket reproduction
No Prior Repair Patches: Or disclosed
Wheel-Well Liner Integration: Verified where applicable
