The Infiniti QX4 wiper linkage, sometimes called the wiper transmission, is the mechanical assembly that connects the wiper motor to the wiper arms. It converts the motor rotation into the side to side sweep that clears the windshield. This is a used part inspected for play at the pivots, worn bushings, and bent or damaged arms.
If your wipers sweep unevenly, slap at the end of travel, slow down, or stop working while the motor still runs, the linkage is a common cause. This linkage fits the Infiniti QX4 built from 1997 to 2003, so confirm your exact year before ordering.
| Item | Details |
|---|---|
| Pivots | No excess play, smooth movement. |
| Bushings | Intact, not worn or cracked. |
| Arms | Straight, no bends or stress marks. |
Exact model year of your QX4 (1997 to 2003)
That your fault is the linkage, not the motor
Any difference in your wiper park position
Your VIN if you are unsure
| Item | Details |
|---|---|
| INCLUDED | The wiper linkage assembly as pictured for the year you confirm. |
| NOT INCLUDED | Wiper motor, arms, blades, and hardware, unless ordered. |
| Tools You Need | Basic hand tools to unbolt and swap the linkage, and to set the park sweep. |
This Infiniti QX4 wiper linkage is offered for the following:
| Vehicle | Compatibility |
|---|---|
| Infiniti QX4, 1997 to 2003 | Wiper linkage, by exact year |
| Front wiper system | Confirm year and park position |
This wiper linkage is offered for the Infiniti QX4 built from 1997 to 2003. Confirm your exact year at order, since pivots and arm geometry can vary across the run. We disclose the donor details before shipping.
Not sure the linkage is your problem? Call (240) 301-0095 with your year. Our team helps you tell a linkage fault from a motor fault and confirms the correct part before your order ships.
Quality control for this part includes:
This is a used part inspected the way a linkage should be checked: pivot play, bushing condition, and arm straightness. It is a bolt on mechanical part, so most owners can fit it at home with basic tools and set the park sweep correctly.
| Application | 1997 to 2003 Infiniti QX4 |
|---|---|
| Part Type | Wiper linkage (transmission) |
| Material | Steel or aluminum, corrosion resistant coating |
| Weight | About 2.5 lbs, varies by build |
| Load Capacity | About 1.5 to 2 lbs per arm |
| Type | Manual linkage system |
| Function | Connects the wiper motor to the wiper arms |
| Install | Bolt on, set the park sweep |
| Replace When | Uneven sweep, slap, play, or seized pivots |
| Shipping | Free to all 50 states, no core charge |
| Warranty | 15 day replacement warranty from delivery |
| Condition | Used, inspected before shipping |
| Sku | vaz410 |
Contact (240) 301-0095 within 15 days of delivery.
