Fender flares are one of the most visible exterior components on the classic Jeep Cherokee XJ. After 20 to 40 years of service (the XJ ran 1984 to 2001), original flares have typically faded from UV exposure, cracked from off-road duty, lost mounting tabs from impact, or been removed entirely during fender modification for larger tires. Restoring correct OEM appearance starts with matched factory-spec flares.
A verified used Cherokee XJ fender flare set restores correct factory presentation on your classic XJ. We inspect every flare set: surface condition (UV fading severity disclosed honestly), mounting tab integrity, clip engagement points, color uniformity across the set, and flare-to-flare match. Year range and body style (2-door SE vs 4-door) fitment verified before shipping.
Get your classic Cherokee XJ back to factory exterior presentation today.
About the Jeep Cherokee XJ (1984-2001)
The Revolutionary Unibody SUV
The XJ Cherokee was revolutionary at the time of its 1984 introduction as one of the first SUVs to use unibody construction instead of body-on-frame. This made the XJ lighter, more efficient, and better-handling than competing body-on-frame SUVs while maintaining serious off-road capability. The 17-year production run from 1984 to 2001 saw remarkably few major changes, reflecting how right Jeep got the original design.
Body Styles and Trim Variants
2-door SE: entry-level 2-door, common as a budget XJ
4-door Classic: base 4-door trim
4-door Sport: popular mid-trim
4-door Limited: higher trim with leather and equipment
4-door Country: higher trim with two-tone paint, body-color or contrasting flares on some applications
Vehicle Compatibility
Direct Fit (specify body style and year at time of order):
Vehicle
Compatibility
Jeep Cherokee XJ 1984-2001
Single generation, 17-year run, unibody construction
2-Door SE Body Style
2-door variant flare set
4-Door Body Styles
Classic, Sport, Limited, Country trim variants share 4-door flares
Cross-Reference Jeep MJ Comanche 1986-1992 Front
Shared XJ front body sheet metal, front flares cross-compatible
NOT Compatible Across Generations
Pre-1984 SJ Cherokee (different body-on-frame construction), post-2001 KJ Liberty (replaced XJ, different platform), and KK/KL/KM Cherokee (later generations using Cherokee name, different platforms)
NOT Compatible MJ Rear
MJ Comanche rear is pickup bed not SUV body, rear flares NOT interchangeable
Body Modification Caution
Cut or trimmed fenders require body repair before OEM flare fitment
Condition and Inspection
Surface condition verified (UV fading severity assessed and disclosed)
Crack inspection (no major structural cracks, minor surface marks disclosed)
Clip engagement points verified (push-pin holes not stripped)
Color uniformity verified within set (matte black depth consistent)
Flare-to-flare set match (within a single sale, flares match in age)
No prior fiberglass repair patches or disclosed if present
Leading edge condition (most damage-prone area on XJ from gravel and brush)
Donor XJ year and trim disclosed where possible
Age-appropriate cosmetics disclosed honestly since these are 20-40 year old parts
Cleaned of dirt and grime before shipping
Packaged with surface protection to prevent transit damage
For Jeep Cherokee XJ 1984-2001 (full generation)
Both 2-door SE and 4-door body styles supported
Surface condition verified on every flare set
Age-appropriate cosmetic signs disclosed honestly
Mounting tab integrity confirmed
Clip engagement points verified
Color uniformity confirmed across set
Authentic OEM original equipment, not aftermarket
MJ Comanche pickup front cross-reference available
Body modification check guidance before ordering
Classic Jeep specialist support team
Free shipping all 50 states
15 day replacement warranty on defects
No core charge, keep your old flares
Part Type
Fender flare set (full or partial)
Vehicle Application
Jeep Cherokee XJ 1984-2001, single 17-year generation
Body Styles Supported
2-door SE and 4-door (Classic/Sport/Limited/Country)
Construction
Reinforced plastic with OEM mounting tabs
Surface Finish
OEM matte black textured (standard), body-color/two-tone on some Country/Limited
Set Composition
Typically 4 flares (full set), available as front pair, rear pair or single
Mounting Style
Screws into body fender lip plus push-pin clips into body holes
Approximate Weight
5 to 9 lbs per set
Hardware
Push-pin clips often need replacement (common wear item on classic XJ)
Installation Difficulty
DIY-friendly, 30 to 90 minutes for full set
Tools Needed
Standard sockets and screwdrivers, plastic trim tools, push-pin removal tool
Coding Required
No
Service Life
Original flares 20 to 40 years before significant degradation
Donor Generation Disclosed
Before shipping
Body Modification Caution
Cut or trimmed fenders require body repair first
Price
$200.00
Brent Caldwell
Restoring a 1997 Cherokee XJ Sport 4-door (4.0L). Factory flares were faded grey and missing two push-pins. Vaz had a verified used 4-door set with matte black still showing good depth, donor was a 1999 XJ. Confirmed my fenders had not been cut. Install took about an hour including new push-pin clips. The classic XJ look is back. Excellent service from a team that clearly knows the XJ platform.
Sandra Whitfield
Picked up a front pair for my 1992 MJ Comanche. Vaz confirmed XJ Cherokee front flares cross-reference to MJ front, which is exactly right and what I needed. Donor was a 1991 XJ front pair. Color match to my existing rears is close enough. One star off because the matte black has more fade than the photos suggested but applied Solution Finish and they look excellent now. Service was very knowledgeable about the MJ cross-reference.
My XJ has cut fenders for 33-inch tires. Will OEM flares fit?
Not cleanly. OEM XJ flares require the original unmodified body fender lip with original screw and clip locations intact. If your fenders have been cut or trimmed, OEM flares will not align correctly with the body and may not have mounting points to attach to. Options: (1) repair the body to OEM spec with fiberglass and bodywork (significant labor), (2) install aftermarket pocket-style or extended-coverage flares designed to cover modified fenders (Bushwacker Cut-Out flares are popular for this), or (3) leave modified fenders exposed if the truck is a dedicated off-road rig. Inspect your truck before ordering.
I have a 1990 Cherokee. Will flares from a 1998 Cherokee fit?
Yes typically. Jeep used the same body and flare geometry across the entire XJ Cherokee production from 1984 to 2001. The 17-year single generation had remarkably few mid-cycle body changes. A flare set sourced from any XJ year (1984-2001) of the matching body style (2-door or 4-door) will typically fit your 1990 cleanly. Note: very early (1984-1986) and very late (1997-2001) XJ may have minor push-pin clip style differences, but the flare itself is essentially unchanged.
I have a 1989 MJ Comanche pickup. Will XJ Cherokee flares fit?
Front flares yes, rear flares no. The MJ Comanche pickup (1986-1992) was built on the XJ Cherokee platform and shared the XJ front body sheet metal. Front fender flares are cross-referenceable between XJ Cherokee and MJ Comanche of compatible model years. Rear flares are NOT cross-compatible since the MJ has a pickup bed while the XJ has the SUV body. Call (240) 301-0095 if you have an MJ and we will help you source the right front pair.
Do 2-door and 4-door XJ flares interchange?
Rear flares yes typically, front flares no. The front flares on 2-door XJ differ from 4-door XJ because the 2-door has different front fender geometry. Rear flares cover the rear wheel arch which is the same between 2-door and 4-door. Always specify your body style at time of order.
How do I install Jeep XJ flares?
Installation overview: (1) Remove existing flares by unscrewing screws from inside the fender lip and releasing push-pin clips with a plastic trim tool. (2) Clean the body fender lip thoroughly, removing any old adhesive residue. (3) Inspect push-pin clip points on the body, if push-pin holes are damaged consider drilling for slightly larger clips. (4) Position the new flare against the body and align with screw holes. (5) Start screws by hand to verify thread engagement (plastic does not need much torque). (6) Push push-pin clips into body holes until they snap. (7) Verify gap consistency between flare and body around the entire arch. Total time 30 to 90 minutes for a full set. New push-pin clips often needed (these are typically the failure point on classic XJ flare installation).
My XJ flares are faded but otherwise good. Can I restore them?
Yes, several options. (1) Solution Finish Trim Restorer is a popular permanent restoration product specifically formulated for matte black exterior trim. (2) Forever Black is another option. (3) Aerosol black trim paint as a temporary restoration (typically lasts 6 to 18 months before re-fading). (4) Used flare replacement (this listing) if your existing flares are damaged beyond cosmetic restoration. Many XJ owners maintain their flares with periodic trim restorer application to keep the factory matte black finish looking fresh.
Are these authentic OEM flares or aftermarket?
These are authentic OEM original equipment flares sourced from donor XJ Cherokee vehicles. We do not sell aftermarket reproduction flares on this listing. Authentic OEM provides factory-correct geometry and the matte black textured finish that matches your existing body trim. If you want aftermarket flares (Bushwacker pocket-style, Rugged Ridge, MOPAR replacement aftermarket), those are different products.
How does shipping work?
Free shipping to all 50 US states. A full XJ flare set weighs 5 to 9 lbs and ships in a medium-large box (typically 36 x 24 x 16 inches). UPS or FedEx Ground. Typical transit is 5 to 10 business days. Each flare is wrapped to prevent transit damage.
15 Day Replacement Warranty
Covered:
Defects discovered at delivery (broken flares on arrival not disclosed prior, missing pieces from advertised set, broken mounting tabs not disclosed, severely faded color not flagged before shipping)
Not Covered:
UV fading or weathering that occurs after install
Damage from improper installation including over-tightened screws that crack plastic
Damage from off-road duty after install
Normal cosmetic age signs consistent with 20-40 year old parts (some UV fading expected)
Labor costs of any kind
Fitment issues caused by previously cut or trimmed fender lips (
verify body condition before ordering). Contact (240) 301-0095 within 15 days of delivery.
For Jeep Cherokee XJ: 1984-2001 single 17-year generation
