This is a supplemental restraint system (SRS) airbag for the Land Rover Defender. The airbag works with the crash sensors, seatbelt pre-tensioners, and the SRS control module to inflate in a collision and help protect occupants. A missing or faulty airbag affects occupant safety, sets SRS warning lights, and can cause a vehicle to fail inspection. The spec indicates a steering-wheel (driver) airbag; the exact type and position must be confirmed by VIN. Important safety notes: this is a pyrotechnic device. An airbag contains an explosive inflator charge and must be installed by a qualified technician; it is not a do-it-yourself, plug-and-play part, and mishandling can cause an accidental deployment. Confirm the unit is never deployed, with an intact, unactivated inflator, and confirm it is not on an active NHTSA recall (for example, the industry-wide Takata inflator recalls). After installation, the SRS module may need VIN coding or a reset and any fault codes cleared. This airbag is built to OEM and FMVSS specifications. We do not claim to have impact-tested the unit; we route final verification to a qualified installer.
| Item | Details |
|---|---|
| Type | Driver, passenger, curtain, or knee; confirm by VIN. |
| Condition | Never deployed; intact, unactivated inflator. |
| Recall | Not on an active NHTSA recall. |
| Item | Details |
|---|---|
| INCLUDED | The Defender SRS airbag module as confirmed by VIN; exact type and contents confirmed at order. |
| NOT INCLUDED | SRS control module, clockspring, wiring, connectors, or mounting hardware unless confirmed at order. |
| Tools You Need | Professional SRS service only: battery disconnect and standby, a diagnostic tool for SRS reset or VIN coding, and proper handling of a pyrotechnic device. Not a do-it-yourself job. |
This airbag is offered for the Land Rover Defender, confirmed by VIN. Key fitment points:
| Vehicle | Compatibility |
|---|---|
| Land Rover Defender | L663 (2020+) |
| Type | Steering-wheel (driver) airbag; confirm by VIN |
| Not assumed | The classic Defender is a different vehicle; do not assume cross-fit |
The spec indicates the modern L663 Defender (2020+). The classic Defender and the L663 are entirely different vehicles with different (or no) airbags, so cross-fit is not assumed. A driver airbag must match the exact steering wheel and SRS configuration, so confirm the type, position, and part by VIN before ordering. We confirm the details with you before shipping.
Not sure which Defender airbag you need? Call (240) 301-0095 with your VIN. Our team confirms the type, position, never-deployed condition, and recall status before your order ships.
Quality control for this part includes:
Because the condition is listed only as 'Used', we confirm the safety-critical details with you before shipping: that the airbag is never deployed, with an intact, unactivated inflator, that it is a genuine OEM unit (salvage airbags have a known counterfeit and improper-refill problem), and that it is not on an active NHTSA recall. Airbag inflators are DOT Class 9 hazardous goods and ship under UN3268 by a hazmat-compliant ground carrier. Installation is for a qualified technician only; the SRS module may need VIN coding or a reset afterward.
| Part | Land Rover Defender SRS airbag module |
|---|---|
| Type | Steering-wheel (driver) airbag per the spec; confirm by VIN |
| Material | Nylon and polyester airbag with metal inflator |
| Connectivity | SRS plug; VIN-programmable on some models |
| Fits | L663 Defender (2020+) per the spec; confirm by VIN |
| Condition | Used; confirm never deployed, intact inflator |
| Recall | Confirm not on an active NHTSA recall |
| Install | Professional installation required (pyrotechnic device) |
| After Install | SRS reset or VIN coding may be needed; clear fault codes |
| Shipping | DOT Class 9 hazmat, UN3268, ground hazmat carrier |
| Category | Safety (SRS restraint) |
| Sku | vaz617 |
Contact (240) 301-0095 within 15 days of delivery.