About the Lincoln MKX Grille
The lower corners of the MKX's front bumper carry a pair of textured grille inserts that frame the fascia, finish the fog light area, and pass airflow to the inner bumper and wheel well areas, primarily a styling element per the live page's own FAQ. Each insert is injection-molded ABS with a UV-resistant surface, a molded edge profile that follows the factory panel lines, and integrated snap tabs with locking clips, so the pair presses into the bumper openings without screws or tools.
Why MKX Owners Replace the Side Grilles
Road debris and parking scrapes lead: cracked louvers from stone strikes, broken snap tabs from a previous removal, sun-faded and chalky surfaces that age the whole front end, and inserts lost outright with a damaged bumper cover. Because the pieces snap in, a clean pair is among the fastest cosmetic fixes an MKX can get.
Things to Confirm Before Ordering
- Whether your MKX carries forward collision sensors or front cameras in the bumper, per the live FAQ caution
- Your model year within the 2016 to 2018 second-generation run
- A photo of your front bumper, which settles the configuration question in one step
- Today's price, by phone, since this listing is quoted rather than priced online
What Is Included, What Is Not Included
| Detail | Description |
|---|
| INCLUDED | The left and right side grille inserts with their integrated snap tabs and locking clips. |
| NOT INCLUDED | The center grille, Lincoln emblem, fog lights, sensors, and cameras. The live page notes emblem compatibility but the emblem itself is not included. |
| Tools You Need | Usually none, per the live FAQ; a trim removal tool helps when extracting old or broken inserts. |
Vehicle Compatibility
| Detail | Description |
|---|
| Lincoln MKX (second generation) | 2016 to 2018, configuration checked against your bumper |
| Sensor-equipped MKX | May not be compatible; no sensor or camera cutouts per the live FAQ |
| Lincoln Nautilus (2019+) | Renamed successor with a different front end, not covered |
| Donor Reference | 2016 Lincoln MKX |
Fitment Assistance
Call (240) 301-0095 with your VIN, year, and a photo of your front bumper. We confirm the insert style and the sensor question in one call and quote the pair on the spot.
Condition and Inspection
These are used inserts, inspected before shipping:
- Snap tabs and locking clips checked intact, the make-or-break detail
- Louvers inspected for cracks and impact damage
- Surface checked for fade and chalking
- Both sides photographed before purchase
Why Buy from Us
- Sensor-configuration check before money changes hands, per the live FAQ caution
- Tab-by-tab inspection, since broken tabs are what ruin snap-in trim
- Matched pair with consistent finish on both sides
- Free shipping to all 50 states, no hidden fees
- No core charge
- 15 day replacement warranty
Are these original Lincoln OEM parts?
No, these are high-quality aftermarket replacements built to OEM specifications. They match the fit, finish, and appearance of the factory originals.
Are these grilles functional or purely decorative?
They are primarily decorative but also allow airflow to inner bumper or wheel well areas.
Will these affect my parking sensors or front camera?
These specific grille inserts do not contain sensor or camera cutouts. If your MKX has forward collision sensors or side-mounted front cameras, this version may not be compatible.
Do I need any tools to install these?
In most cases, no tools are needed. The inserts are designed with integrated snap tabs that press into the bumper openings. However, a trim removal tool may help if you're removing old or damaged grilles. Additional questions:
Is this the big center grille?
No. Per the live listing's specifications, this is the left and right pair of side grille inserts that mount in the front bumper corners. The large center grille is a separate part; call if that is what you need.
Why is there no price shown?
This listing is quoted by phone. Call (240) 301-0095 and we give you today's price for the pair, confirm availability, and run the sensor-configuration check in the same conversation.
Which MKX years do these fit?
The second-generation MKX, 2016 to 2018, with the donor being a 2016. The model was renamed Nautilus for 2019 with a redesigned front end, so those cars use different inserts.
How do snap-in inserts come out without breaking?
Work a trim tool behind each locking clip and release them one at a time rather than pulling the panel. Old inserts are usually brittle, which is fine since they are being replaced, but patience protects the bumper paint.
