This is the crankshaft for the Mazda B2300. The crankshaft converts the pistons' up-and-down motion into the rotation that drives the transmission, and it must run true and balanced for the engine to be smooth. A damaged or worn crankshaft causes knocking, vibration, and eventually engine failure, so it is replaced during a rebuild. This one is forged steel with internal balance. The Mazda B2300 is the US-market gas pickup, a rebadged Ford Ranger with the 2.3L inline-4. The early trucks used the Ford 2.3L 'Lima' engine and the later trucks the 2.3L Duratec, which are different engines with different crankshafts, so confirm the engine code by VIN; the listing is for the 2.3L in B2300 models from 1994 to 2001. Unlike the B2500, which spans a gas and a diesel engine, the B2300 unambiguously uses the US gas engine. The journal diameters listed (2.398 in main, 2.123 in rod) are the standard specs, so for a used crankshaft the actual measured journal diameters, straightness, and whether it is standard or reground undersize must be confirmed. Fitting a crankshaft is an internal engine job requiring full teardown, torque specs, and balancing, for experienced mechanics; the bearing clearances should be checked with plastigage and the bearing sizes confirmed.
| Item | Details |
|---|---|
| Engine | US 2.3L (Ford 2.3L Lima or Duratec), by VIN. |
| Journals | Measured diameters; standard or reground undersize. |
| Install | Internal engine job; bearing fit and balancing. |
| � | The exact engine code (Ford 2.3L Lima or Duratec), by VIN |
|---|---|
| � | The measured main and rod journal diameters, and straightness |
| � | Whether the crankshaft is standard or reground undersize |
| � | The matching bearing sizes for the bearing fit |
| Item | Details |
|---|---|
| INCLUDED | The B2300 crankshaft as confirmed for your engine; exact specification confirmed at order. |
| NOT INCLUDED | Main and rod bearings, gaskets, or balancing service unless confirmed at order. |
| Tools You Need | Internal engine service: full teardown, main and rod bearing fit (plastigage), torque-to-spec assembly, and balancing. A professional engine job for an experienced mechanic. |
This crankshaft is offered for the Mazda B2300, confirmed by engine. Key fitment points:
| Vehicle | Compatibility |
|---|---|
| Mazda B2300 | US 2.3L inline-4 (Ford Ranger twin) |
| Engines | Ford 2.3L Lima (early) or 2.3L Duratec (later) |
| Model Years | 2.3L in B2300 models, 1994 to 2001 |
The Mazda B2300 is the US-market gas pickup, a rebadged Ford Ranger with the 2.3L inline-4. The early trucks used the Ford 2.3L Lima and the later trucks the 2.3L Duratec, which are different engines with different crankshafts, so confirm the engine code by VIN; the listing covers 1994 to 2001. Unlike the B2500, the B2300 unambiguously uses the US gas engine. We confirm the exact part with you before shipping.
Not sure which B2300 crankshaft you need? Call (240) 301-0095 with your VIN. Our team confirms the engine code and the measured journal sizes before your order ships.
Quality control for this part includes:
| � | Engine code confirmed for your VIN before shipping |
|---|---|
| � | Main and rod journals measured |
| � | Straightness checked |
| � | Standard-versus-reground confirmed |
| � | Matching bearing sizes identified before purchase |
Because this is a used internal engine part, we confirm the measured main and rod journal diameters, the straightness, and whether the crankshaft is standard or reground undersize, along with the matching bearing sizes. Fitting a crankshaft is an internal engine job requiring full teardown, bearing fit, torque specs, and balancing, so we route the install to an experienced mechanic.
| � | Genuine used Mazda part, inspected and condition documented before shipping |
|---|---|
| � | Engine code and year confirmed by VIN before dispatch |
| � | Correct engine variant matched to your vehicle |
| � | Compression tested where possible and findings disclosed |
| � | 30% off shipping to all 50 states with no hidden surcharges |
| � | Real person on the phone at (240) 301-0095 to match your VIN to the correct part |
| � | 15 day replacement warranty on internal mechanical defects |
| � | Mazda-experienced support team |
| Part | Mazda B2300 crankshaft (2.3L inline-4) |
|---|---|
| Material | Forged steel |
| Engine | US 2.3L gas (Ford Ranger twin); Lima or Duratec |
| Balance Type | Internal |
| Main Journal Diameter | 2.398 in (60.91 mm) standard; confirm measured |
| Rod Journal Diameter | 2.123 in (53.9 mm) standard; confirm measured |
| Stroke Length | 3.126 in (79.4 mm) |
| Install | Internal engine job; bearing fit and balancing |
| Applicable Years | 2.3L B2300, 1994 to 2001 |
| Condition | Used; confirm standard or reground |
| Shipping | 30% off shipping to all 50 states, no core charge |
| Category | Engine (Crankshaft) |
| Sku | vaz607 |
Contact (240) 301-0095 within 15 days of delivery.
