Ford 10R80 Transmission for Sale

About This Transmission

The Ford 10R80 is the 10 speed longitudinal automatic transmission that powers the modern F-150, Mustang GT and GT500, Bronco, Raptor, Ranger, Expedition, and Lincoln Navigator. Co-developed by Ford and General Motors starting in 2013 and introduced to the market in 2017 in the F-150 and Mustang GT, the 10R80 replaced the 6R80 6 speed and immediately became the highest gear count automatic ever offered in a Ford pickup or pony car.

The 10 forward gears, wide 7.4 to 1 ratio span, integrated lockup torque converter, and direct acting solenoids deliver smoother acceleration, faster part throttle response, and meaningfully better highway fuel economy than the 6R80 it replaced. The unit is rated for up to 700 lb-ft of stock torque and aftermarket built versions support up to 1,000 horsepower without changing clutch capacity.

The 10R80 is found in the Ford F-150 (2017 onward), F-150 Raptor (2017 onward), Mustang GT (2018 onward), Mustang GT500 (2020 onward), Mustang Mach 1, Bronco (2021 onward), Ranger (2019 onward), Expedition (2018 onward), Lincoln Navigator (2018 onward), and Aviator. It is the universal Ford rear wheel drive automatic of this generation.

Signs You Need a Replacement Transmission

• Torque converter shudder, common on early 2017 to 2019 units (well documented in TSB 19-2155, TSB 20-2331)
• Harsh 1-2 or 2-3 shifts that cannot be calmed by a re flash
• Bind in reverse or delayed engagement after shift to drive
• Ratcheting noise on light throttle, often a sign of internal valve body wear
• Slipping under load (most common after high mileage on towing or modified applications)
• Loss of one or more gears (limp mode)
• Cracked case from impact or off road damage

Known Problems With This Transmission

• Torque converter shudder (2017 to 2019): The most common 10R80 complaint. Caused by internal lockup clutch material that breaks down with age and contaminates the fluid. Ford issued multiple TSBs (most recently TSB 20-2331). Fix is typically a torque converter replacement plus complete fluid flush. We inspect torque converter condition and disclose status on every unit.
• Harsh shift complaints: Early 2017 to 2018 units shipped with calibration that produced harsh 1-2 and 2-3 shifts. Ford released calibration updates. A used unit may need a re flash to current calibration when installed.
• Valve body wear: At very high mileage (150,000 plus) the valve body solenoid pack can develop irregular pressure modulation, causing flare on shifts. We pressure test every unit.
• Pump cavitation on neglected fluid units: 10R80s with overdue fluid service can develop pump cavitation noise. We document fluid condition before shipping.
• Calibration mismatch: A 2017 calibration will not run optimally with a 2022 vehicle and vice versa. We disclose calibration year so your shop knows what to flash.

10R80 Variants by Year and Application

Year matching matters for ECU and TCM calibration:

What Is Included, What Is Not Included

Vehicle Compatibility, Direct Fit

Direct factory applications:

Engine compatibility: 2.3L EcoBoost I4, 2.7L EcoBoost V6, 3.0L Power Stroke V6 Diesel, 3.0L EcoBoost V6, 3.3L Ti-VCT V6, 3.5L EcoBoost V6, 3.5L PowerBoost Hybrid V6, 5.0L Ti-VCT V8 (Coyote), 5.2L Predator V8 (GT500 and Raptor R).

Not sure if this fits? Call (240) 301-0095 with your year, model, and engine. We confirm calibration and RWD vs 4WD configuration before every order ships.

Used OEM vs Rebuilt vs Aftermarket Built

A used OEM 10R80 from a low mileage donor with verified torque converter condition is the most cost effective option for stock or mildly modified F-150, Mustang, Bronco, or Raptor applications. Pricing is roughly one third to one fifth of a built or rebuilt unit. Our 10R80s are pressure tested, shift tested, and the torque converter condition is documented.

A professionally rebuilt 10R80 with updated calibration, upgraded clutch packs, and a new torque converter typically runs $4,500 to $7,500. This is the right path for a high mileage F-150 or for a tow vehicle.

An aftermarket built 10R80 (Project Carbon, PowerTech, Suncoast) is rated for 1,000 horsepower plus and runs $6,500 to $14,000. This is for boosted Coyote, GT500, or Raptor R builds where the stock unit is at the edge of its capacity.

Condition and Inspection Process

• Pressure test on the dyno bench, line pressure recorded across all gears
• Shift test on the dyno bench, all 10 forward gears and reverse cycled
• Torque converter inspected for shudder material, lockup clutch condition disclosed
• Valve body solenoid pack tested for proper actuation
• Internal harness inspected for damage
• Case inspected for cracks, output shaft for runout, splines for wear
• Year and TCM calibration code documented
• Donor vehicle and mileage disclosed where available

Mileage is documented when available from the donor vehicle. Where mileage cannot be confirmed (salvage), we disclose this before shipping.

Buyer Tips, What to Know Before You Order

• Year matching matters: A 2017 unit installed in a 2022 vehicle will need a TCM re flash. Plan for this with your shop.
• Torque converter is the single most common 10R80 failure point. Even on a healthy unit, plan for a complete fluid flush at install. On 2017 to 2019 units, plan for a torque converter replacement as preventive maintenance for towing or hard use.
• RWD vs 4WD: Confirm before ordering. Tail housing and adapter differ.
• Mercon ULV only: Do not substitute. Wrong fluid causes immediate shudder and clutch failure.
• TCM stays with the vehicle: A used 10R80 does not include a TCM. The vehicle TCM controls the new transmission. A re flash is typically required for calibration matching.

Why Buy From Vaz Auto Solutions

• Year and calibration code documented before you pay
• RWD vs 4WD configuration confirmed before shipping
• Torque converter inspected and shudder status disclosed (critical for 2017 to 2019 units)
• Pressure tested and shift tested on the dyno bench, all 10 gears cycled
• Donor vehicle and mileage disclosed where available
• Fitment verified for your specific F-150, Mustang, Bronco, Raptor, Ranger, or Expedition application
• No core charge, keep your old transmission
• Free freight pallet delivery to all 50 states, no hidden fees
• 15 day replacement warranty on internal defects
• Call (240) 301-0095, talk to someone who actually understands 10R80 TSB issues and torque converter shudder